Chapter 1: RabbitFLEX BL300F Introduction
- 1.1 RabbitFLEX BL300F Options
- 1.2 The RabbitFLEX Configurator
- 1.2.1 Configurator Access
- 1.2.2 Ordering Information and History
- 1.2.3 Assumptions
- 1.3 RabbitFLEX Tool Kit
- 1.4 CE Compliance
- 1.4.1 Immunity
- 1.4.2 Emissions
- 1.4.3 Design Requirements for CE Compliance
- 1.4.3.1 General Design Requirements
- 1.4.3.2 Safety Design Requirements
- 1.4.4 Interfacing RabbitFlex to Other Devices
- 1.5 What to Expect
Chapter 2: Getting Started
- 2.1 Hardware Preparation
- 2.1.1 Hardware Connections
- 2.1.1.1 Connect Programming Cable
- 2.1.1.2 Connect Power
- 2.2 Software Preparation
- 2.2.1 Installing Dynamic C
- 2.2.2 Starting Dynamic C
- 2.3 Verify Serial Connections
- 2.4 Ethernet Communication
- 2.4.1 Direct Connection
- 2.4.2 Indirect Connection
- 2.4.3 Setting IP Addresses
- 2.4.4 Verify the Ethernet Connection
- 2.5 Troubleshooting Tips
- 2.7 Contact Information
Chapter 3: Design Implementation and Information
- 3.1 General Board Information
- 3.1.1 Base Board Layout
- 3.1.2 Board-Specific Information
- 3.1.2.1 System ID Block
- 3.1.2.2 User Block
- 3.2 Cells and Circuits
- 3.2.1 Cell Definition
- 3.2.2 Cell Descriptions
- 3.2.2.1 One-Transistor Cells
- 3.2.2.2 Two-Transistor Cells
- 3.2.3 Board Map
Chapter 4: RabbitFLEX BL300F Options
- 4.1 Overview of Options
- 4.2 Overview of Connector and Cell Association
- 4.2.1 Connector Pinout Diagram
- 4.2.1.1 Connector 1
- 4.2.1.2 Connector 2
- 4.2.1.3 Connector 3 and 4
- 4.2.1.4 Connector 5
- 4.2.1.5 Connector 6
- 4.2.2 Connector Mating Information
- 4.3 RabbitFLEX BL300F Option Specifications
- 4.3.1 Core Module
- 4.3.2 RS-232
- 4.3.3 RS-485
- 4.3.4 RabbitNet
- 4.3.5 LCD
- 4.3.6 Keypad
- 4.3.6.1 Keypad Inputs
- 4.3.6.2 Keypad Outputs
- 4.3.7 External Interrupt
- 4.3.8 External Reset
- 4.3.9 PWM Outputs
- 4.3.10 Digital Inputs
- 4.3.10.1 Digital Input 1.4 V Threshold
- 4.3.10.2 Digital Input 2.8 V Threshold
- 4.3.10.3 Digital Input 4.4 V Threshold
- 4.3.10.4 Contact Input
- 4.3.10.5 Bidirectional Logic
- 4.3.11 Digital Outputs
- 4.3.11.1 Sinking Driver 1 A
- 4.3.11.2 Sinking Driver 100 mA
- 4.3.11.3 Sourcing Driver 400 mA
- 4.3.11.4 Sourcing Driver 50 mA
- 4.3.11.5 Line Driver, 100 W, 5 V
- 4.3.12 Digital-to-Analog Converters
- 4.3.12.1 DAC 0-3 V
- 4.3.12.2 DAC 0-10 V
- 4.3.12.3 Speaker
- 4.3.13 Analog-to-Digital Converters
- 4.3.13.1 Analog Input 0-3 V
- 4.3.13.2 Analog Input 0-10 V
- 4.3.13.3 Analog Input 4-20 mA
- 4.3.14 Power Routing
Chapter 5: More Information on RabbitFLEX BL300F Options
- 5.1 PowerCore Module Options
- 5.1.1 Ethernet
- 5.1.2 Serial Flash
- 5.2 Serial Communication
- 5.2.1 Comparison of RS-232 and RS-485
- 5.3.1 Termination Resistors
- 5.4 Digital Outputs
- 5.4.1 Sinking and Sourcing Drivers
- 5.4.2 Line Drivers
- 5.4.3 Protection Diodes
- 5.5 DACs
- 5.6 Speaker
- 5.7 ADCs
Chapter 6: Applications Programming
- 6.1 RabbitFLEX Sample Programs
- 6.2 RabbitFLEX BL300F Files
- 6.2.1 RabbitFLEX BL300F Libraries
- 6.2.2 RabbitFLEX BL300F Design File
- 6.3 RabbitFLEX BL300F Software Concepts
- 6.3.1 Board Initialization
- 6.3.2 Software Pin Names
- 6.3.3 Pin Groups
- 6.3.4 Analog Input and Output
- 6.3.5 RS-232
- 6.3.6 Keypad
- 6.3.7 LCD
- 6.3.8 Speaker
- 6.3.9 Thermistor
- 6.3.10 Serial Flash
- 6.4 Software Walk-Through
- 6.4.1 Studying speaker_tone.c
- 6.4.2 Extending speaker_tone.c
- 6.4.3 Extending speaker_tone.c with I/O Grouping
- 6.5 API Functions
- 6.6.1 Board Initialization
- 6.6.2 Pin Names
- 6.6.3 Digital Inputs
- 6.6.4 Digital Outputs
- 6.6.5 Analog Inputs
- 6.6.6 Analog Outputs
- 6.6.7 LCD
- 6.6.8 Keypad
- 6.6.9 Speaker
- 6.6.10 Serial Communication
Appendix A. RabbitFLEX BL300F Specifications
- A.1 Electrical and Mechanical Characteristics
- A.2 Conformal Coating
Appendix B. Power Supply
- B.1 Power Supplies
- B.2 Battery-Backup Circuits
- B.3 Reset Generator
- B.4 Power On / Reset State
Appendix C. Demonstration Board
- C.1 Demonstration Board Connections
Appendix D. RabbitFLEX Keypad/Display Kit
- D.1 Keypad
- D.4 LCD Module
Schematics
Index
| Z-World http://www.zworld.com Voice: (530) 757-3737 FAX: (530) 757-3792 sales@zworld.com |