| RabbitNet Peripheral Cards Users Manual |
Table of Contents
1. The RabbitNet Protocol
- 1.1 General RabbitNet Description
- 1.1.1 RabbitNet Connections
- 1.1.2 RabbitNet Peripheral Cards
- 1.1.3 Connectivity Tools
- 1.1.4 DIN Rail Mounting
- 1.2 Physical Implementation
- 1.2.1 Control and Routing
- 1.3 Dynamic C
- 1.3.1 Dynamic C Libraries
- 1.3.1.1 Accessing and Downloading Dynamic C Libraries
- 1.3.2 Sample Programs
- 1.3.3 General RabbitNet Operation
- 1.3.4 General RabbitNet Function Calls
- 1.3.5 Status Byte
2. Digital I/O Card
- 2.1 Features
- 2.1.1 Software
- 2.2 Connections
- 2.2.1 Power Supply
- 2.3 Pinout
- 2.3.1 Headers
- 2.3.2 Indicator LED
- 2.4 Digital I/O
- 2.4.1 Digital Inputs
- 2.4.2 Digital Outputs
- 2.5 Analog Inputs
- 2.5.1 Single-Ended Inputs
- 2.5.2 Differential Inputs
- 2.5.3 Calibrating the Analog Inputs
- 2.5.3.1 Calibration Constants
- 2.5.3.2 Calibration Recommendations
- 2.5.3.3 Factory Calibration
- 2.6 Software
- 2.6.1 Dynamic C Libraries
- 2.6.2 Sample Programs
- 2.6.2.1 Digital I/O
- 2.6.2.2 Analog Inputs
- 2.6.3 Digital I/O Card Function Calls
- 2.6.3.1 Digital Input Function Calls
- 2.6.3.2 Digital Output Function Calls
- 2.6.3.3 Analog Input Function Calls
- 2.6.4 Status Byte
- 2.7 Specifications
- 2.7.1 Electrical and Mechanical Specifications
- 2.7.1.1 Physical Mounting
- 2.7.2 Jumper Configurations
3. A/D Converter Card
- 3.1 Features
- 3.1.1 Software
- 3.2 Connections
- 3.2.1 Power Supply
- 3.3 Pinout
- 3.3.1 Headers
- 3.3.2 Indicator LED
- 3.4 Analog Inputs
- 3.4.1 Analog Current Measurements
- 3.4.2 Calibrating the A/D Converter Chip
- 3.4.2.1 Modes
- 3.4.2.2 Calibration Constants
- 3.4.2.3 Calibration Recommendations
- 3.4.2.4 Factory Calibration
- 3.5 Software
- 3.5.1 Dynamic C Libraries
- 3.5.2 Sample Programs
- 3.5.3 A/D Converter Card Function Calls
- 3.5.4 Status Byte
- 3.6 Specifications
- 3.6.1 Electrical and Mechanical Specifications
- 3.6.2 Physical Mounting
- 3.7 Jumper Configurations
4. D/A Converter Card
- 4.1 Features
- 4.1.1 Software
- 4.2 Connections
- 4.2.1 Power Supply
- 4.3 Pinout
- 4.3.1 Headers
- 4.3.2 Indicator LED
- 4.4 D/A Converter Outputs
- 4.4.1 Calibration
- 4.5 Software
- 4.5.1 Dynamic C Libraries
- 4.5.2 Sample Programs
- 4.5.3 D/A Converter Card Function Calls
- 4.5.4 Status Byte
- 4.6 Specifications
- 4.6.1 Electrical and Mechanical Specifications
- 4.6.2 Physical Mounting
5. Relay Card
- 5.1 Features
- 5.1.1 Software
- 5.2 Connections
- 5.2.1 Power Supply
- 5.3 Pinout
- 5.3.1 Headers
- 5.3.2 Indicator LEDs
- 5.4 Relay Outputs
- 5.5 Software
- 5.5.1 Dynamic C Libraries
- 5.5.2 Sample Programs
- 5.5.3 Relay Card Function Calls
- 5.5.4 Status Byte
- 5.6 Specifications
- 5.6.1 Electrical and Mechanical Specifications
- 5.6.2 Physical Mounting
6. Keypad/Display Interface
- 6.1 Features
- 6.1.1 Software
- 6.2 Connections
- 6.2.1 Power Supply
- 6.3 Key RabbitNet Keypad/Display Interface Components
- 6.3.1 Headers and Jacks
- 6.3.1.1 Keypads
- 6.3.1.2 Liquid Crystal Displays
- 6.3.2 LEDs
- 6.3.3 Buzzer
- 6.4 Liquid Crystal Display Backlights
- 6.5 Display Contrast
- 6.6 Software
- 6.6.1 Dynamic C Libraries
- 6.6.2 Sample Programs
- 6.6.3 RabbitNet Keypad/Display interface Function Calls
- 6.6.3.1 Buzzer
- 6.6.3.2 LEDs
- 6.6.3.3 Keypad
- 6.6.3.4 Display
- 6.6.4 Status Byte
- 6.7 Specifications
- 6.8 Electrical and Mechanical Specifications
- 6.8.1 Physical Mounting
Appendix A. Keypad/Display Interface Expansion Kit
- A.1 Keypads
- A.1.1 Keypad Templates
- A.2 LCD Displays
- A.2.1 2 × 20 Character LCD
- A.2.2 4 × 20 Character LCD
- A.3 ZMENU.C
- A.4 Configuring Key Code Indexes and Physical Keypad Arrangement
- A.4.1 Basics of Assigning Key Code Indexes
- A.4.2 Expansion Kit Keypads
- A.4.2.1 3 × 4 Keypad
- A.4.2.2 2 × 6 Keypad
- A.4.2.3 4 × 10 Keypad
- A.5 2 × 6 Keypad Datasheet
- A.6 3 × 4 Keypad Datasheet
- A.7 4 × 10 Keypad Datasheet
- A.8 2 × 20 Character LCD Datasheet
- A.9 4 × 20 Character LCD Datasheet
Index
Schematics
| Rabbit Semiconductor www.rabbit.com |