vorr1234
03-07-2007, 05:52 PM
I am having trouble using the Master Slave examples provided.
- I have a RCM3100 board in both the master and slave socket on the prototype boards.
- The prototype board has been updated according to the data sheet (That is I have connected one side of R14 to the 3.3 Volt line).
- I have removed the LCD/Keypad unit .
- I have a debug cable connected to both RCM units.
- I have loaded the master RCM3100 with the sample application "MASTER_DEMO.C"
- I have loaded the slave RCM3100 with the sample application "SLAVE_DEMO.C"
-Both applications successfully run however I get no communication between the boards.
Can you please help me out here.
- I have a RCM3100 board in both the master and slave socket on the prototype boards.
- The prototype board has been updated according to the data sheet (That is I have connected one side of R14 to the 3.3 Volt line).
- I have removed the LCD/Keypad unit .
- I have a debug cable connected to both RCM units.
- I have loaded the master RCM3100 with the sample application "MASTER_DEMO.C"
- I have loaded the slave RCM3100 with the sample application "SLAVE_DEMO.C"
-Both applications successfully run however I get no communication between the boards.
Can you please help me out here.