Peripherals & Accessories
Peripherals
 |
|||
 |
Bluetooth
Add-On Kit Rabbit-based applications now have even more ways to communicate. Rabbit has added Bluetooth® support for selected core modules, the BL2500 and the BL2600 single board computers. Based on the EmbeddedBlue™ eb506 AHC IN Bluetooth Radio Module from A7 Engineering. |
 |
|
|
|||
|
EG2110
RabbitLink Card for Remote Download/Debug via Internet RabbitLink facilitates remote programming and debugging of any Rabbit microprocessor-based system. It also provides a portal to the Internet for most embedded systems with a serial port, serving web pages and sending E-mail. |
 |
|
|
|||
|
SF1000 Serial Flash Designed to significantly increase the data-storage capabilities of embedded control systems powered by our single-board computers (SBCs). Models offer 4 or 8 megabyte of memory. |
|
 |
|
|||
|
SE1100 Universal Expansion The SE1100 expansion board provides 4 SPDT relays that connect to the digital outputs of any SBC. With 4 relays combined into one integrated interface, the SE1100 saves time by eliminating the need to wire together individual relays. |
|
 |
|
|||
Accessories
|
MiniCore Deluxe Development Kit Power Supply Power supply for RCM5600W and RCM5700 development kits. |
|
|
|
USB Removable Memory Card Reader The USB removable memory card reader is a Rabbit-specific reader to help manage data to and from Rabbit-based devices that are equipped with an xD-Picture CardTM memory card socket and Dynamic C FAT software module. |
|
|
|
USB Programming Cable Connect a Rabbit-based product to a USB port on your PC running the Dynamic C integrated development environment to download programs and monitor the Rabbit-based product during debugging. Available with a 1.27 mm or 2 mm connection header. |
|
|
|
|||
|
RS232-to-USB
Converter Cable for USB-Only PCs This converter allows Rabbit-based systems to be programmed via the USB (universal serial bus) port rather than directly from a serial port. This is necessary if your laptop or computer lacks a serial port. (Note: you will still need the serial programming cable.) This converter has been verified for operation with Dynamic C and the USB-compatible Windows operating systems: 98, 2000, XP, and ME. |
|
|
|
|||
|
DB9 to 10-Pin Flat Ribbon Connector Serial
Cable Serial interface cable with a DB9 on one end and a 10 pin flat ribbon connector on the other. Connects Rabbit prototyping boards to a PC serial port. |
|
 |
|
2mm
Programming Cable 2mm connector for Rabbit 2000-based products, RCM3000/RCM3100, LP3500. |
|
 |
|
1.27
mm Programming Cable 1.27 mm connector for all Rabbit 3000-based and Rabbit 4000-based products (except RCM3000/3100, LP3500). |
|
 |
|
|||
|
|||
|
Rabbit SBC Demonstration Board Interfaces to Rabbit® single-board computers to demonstrate I/O and TCP/IP capabilities. |
 |
|
|
|||
|
Rabbit Cloning
Board for Copying Compiled Software Ideal for copying compiled software programs from one Rabbit-based product to another and for use in a production environment. |
 |
|
|
|||
|
Connector
Adapter Boards Use these adapter boards to provide a connection from RabbitCore modules and select single-board computers to a prototyping/development board that has a prototyping area with 0.1" pitch. |
 |
|
|
|||