RCM2300 RabbitCore®
Model RCM2300
- RCM2300 Description
- RCM2300 Specifications
- RCM2300 Product Documentation
- RCM2300 RabbitCore Data Sheet
Description
The ultra-compact RCM2300 RabbitCore microprocessor core module measures a mere 1.60 x 1.15 inches (41 x 29 mm), simplifying integration and opening up a world of new design options for economical control products. The RCM2300 includes 22.1 MHz clock, 256K of Flash, 128K of SRAM, real-time clock, 29 general-purpose I/O, and 4 serial ports. The RCM2300 is also pin compatible with the RCM2200 Ethernet core module for future Ethernet implementation of user designs.
Key Features
- Most compact and low-cost RabbitCore
- 1.60" x 1.15" x 0.47"
- 128K SRAM
- 256K Flash
- 29 general-purpose I/O
Designing with RabbitCores
The RabbitCore family of microprocessor core modules is designed to facilitate rapid development and implementation of embedded systems. RabbitCores are powered by high-performance 8-bit Rabbit® microprocessors with extensive integrated features and a C-friendly instruction set designed for use with the Dynamic C® development system. The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor for the user's system. Small in size but packed with powerful features, these core modules give designers a complete package for control and communication.
RabbitCore RCM2300 Specifications
| Features | RCM2300 |
|---|---|
| Microprocessor | Rabbit 2000T at 22.1 MHz |
| Flash | 256K |
| SRAM | 128K |
| Backup Battery | Connection for user-supplied battery (to support RTC and SRAM) |
| General Purpose I/O |
29 I/O include:
|
| Additional Inputs | 2 Startup Mode, Reset |
| Additional Outputs | Status, Reset |
| Memory I/O | 4 address, 8 data, plus I/O Read-Write (extra address and Buffer Enable via separate connections) |
| Serial Ports | Four 5 V CMOS-compatible, 2 configurable as clocked ports (1 clocked line available only on programming header) |
| Serial Rate | Max. burst rate = CLK/32 Max. sustained rate = burst/2 |
| Connectors | Two 2 x 13, 2 mm IDC headers |
| Slave Interface | Slave port permits use as master or as intelligent peripheral with Rabbit-based or other master controller. |
| Real-Time Clock | Yes |
| Timers | Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers |
| Watchdog/Supervisor | Yes |
| Power | 4.75-5.25 V DC, 108 mA |
| Operating Temp. | -40°C to +85°C |
| Humidity | 5-95%, non-condensing |
| Board Size | 1.60" x 1.15" x 0.55" (41 mm x 29 mm x 14 mm) |
| Part Number | 20-101-0453 |